• Advertisement

Vintage Artus Flex knives

English language only

Vintage Artus Flex knives

Berichtdoor Kwakster op 16 okt 2019, 08:13

Recently i obtained several unused Artus Flex knives, and i'm currently experimenting a bit with one of them.
All knives came complete with original box, leaflet, spare belt loops & mini-tool (to exchange them)
The Rockwell hardness sticker is still on the blade.

AfbeeldingAfbeelding

AfbeeldingAfbeelding

AfbeeldingAfbeelding

AfbeeldingAfbeelding

Afbeelding

Specs:

Overall length: 9.69 inches (24,6 cm)
Blade length: 5.0 inches (12,7 cm)
Blade thickness: 0.96 mm (!)
Handle materials: aluminium guard & molded rubber grip
Sheath: glass filled nylon with spring steel insert
Weight (knife only): 119,3 grams
Weight (knife + sheath): 260 grams

This background info on these German made Artus Flex knives was translated from a German knife forum.
According to the poster the Artus company designed the original version of the Flex knife for use with certain government agencies (GSG9, BSG, and police) around 1988, and at that time it was solely meant as a tactical knife.
Apparently the idea was to make a fixed blade that would be rigid enough to both stab & cut well, yet which would also be flexible enough to be carried horizontally on a belt in a specially designed sheath which holds both handle & blade in an arc shape to better follow the contours of the human waist.
Once drawn the knife returns to dead straight again and is ready for use.
The poster said that he owned an early all-black Flex knife (but did not show any pictures), which he once received as a birthday present from his wife, who at the time worked at the Artus company in the German city of L├╝denscheid.
He also stated that at the time the Artus company designed & manufactured many more items for said agencies, like tactical vests, helmets, etc.

Some time before introduction of the Flex knife to said agencies however it all fell apart.
Apparently Artus' owner (or it's chief executive, the poster wasn't sure) was caught bribing a certain government official for his assistence in selling the Flex knives in larger quantities to the agencies mentioned, but somehow other authorities found out and the owner was arrested.
While still in custody the man commited suicide by hanging himself, and all of this seemed to have been quite a big scandal in the German press at the time.
The affair also led to quite a crisis for the Artus company, and among other things it was then decided to try to sell the Flex knives on the open market to consumers in an effort to recoup at least some of their investments.
A marketing campaign was launched, and the all-black tactical style aimed at military/police was thrown out to entice entirely different but possibly interesting markets like outdoor & sports, and the knives from then on were offered in various handle & sheath colors.
In the end however the Flex knife never became the success story that the company envisioned, and the then considered high introductory price of ~300 Deutschmarks (currently about 153 Euro or 169 US dollars) didn't help either.

The knife itself and it's sheath system however were definitely well made items from quality materials.
True, the designers seem to have gotten their inspiration for the overall appearance of the Flex knife from the classic Al Mar SERE fixed blade (to put it mildly), but from there the designers then created a radically different knife.

Pictures i took from the pages in the brochure:

AfbeeldingAfbeelding

AfbeeldingAfbeelding

AfbeeldingAfbeelding

AfbeeldingAfbeelding
Kennis weegt niets.
Avatar gebruiker
Kwakster
Forumbaasje
 
Berichten: 4086
Geregistreerd: 01 jan 1970, 00:00
Woonplaats: Apeldoorn

Re: Vintage Artus Flex knives

Berichtdoor Kwakster op 16 okt 2019, 08:14

The factory edge on this knife was a bit blunt, due to one of the black plastic inserts in the sheath, which is made from some form of glass filled nylon.
Not exactly a good choice for a part of the sheath that contacts the edge often.
Will see if i can do something about that.

With the sheath partly disassembled showing both black plastic inserts, as well as the one-piece flat stainless spring:

Afbeelding
Kennis weegt niets.
Avatar gebruiker
Kwakster
Forumbaasje
 
Berichten: 4086
Geregistreerd: 01 jan 1970, 00:00
Woonplaats: Apeldoorn

Re: Vintage Artus Flex knives

Berichtdoor Kwakster op 16 okt 2019, 08:15

I think i may have found a solution for the edge blunting from the black glass filled nylon insert.
First step was to grind some material from the insert with only a coarse diamond file, thus also leaving a coarse surface.
After cleaning/degreasing that surface with some isopropyl alcohol on a piece of microfiber cloth i applied 2 layers of waterproof PVA wood glue on the surface of the insert. (allowed each layer to dry overnight)
PVA stands for polyvinyl acetate, which is the same or close to the same material that expensive Hi-Soft cutting boards are made from, and these are known to be very edge friendly on knives.
When everything had thorougly dried I tested the new PVA surface by slicing it several times with a freshly sharpened cheap peeling knife, and this did not noticeably seem to blunt it's apex.
Next step will be to resharpen the edge of the Flex knife and see how things go from there.

AfbeeldingAfbeelding

AfbeeldingAfbeelding

AfbeeldingAfbeelding
Kennis weegt niets.
Avatar gebruiker
Kwakster
Forumbaasje
 
Berichten: 4086
Geregistreerd: 01 jan 1970, 00:00
Woonplaats: Apeldoorn

Re: Vintage Artus Flex knives

Berichtdoor Kwakster op 16 okt 2019, 08:16

According to the brochure the blade is made from a saltwater proof stainless steel with a hardness between 57-59 HRC, and capable of a highly durable cutting edge.
Now i have exactly zero proof as it isn't mentioned anywhere specifically, but based on this info plus sharpening/deburring/polishing the edge on one of the Flex knives my educated guess would be that the steel might be Becut, as this would fit the properties described almost perfectly.
Wet-grinding completely new bevels on the Tormek SB-250 stone (black silicon carbide) is comparatively slow, and both deburring/polishing with high quality diamond compounds tells me that there are quite a lot of wear-resistant carbides in the steel.
Kennis weegt niets.
Avatar gebruiker
Kwakster
Forumbaasje
 
Berichten: 4086
Geregistreerd: 01 jan 1970, 00:00
Woonplaats: Apeldoorn

Re: Vintage Artus Flex knives

Berichtdoor Kwakster op 16 okt 2019, 08:16

The factory edge on this Flex knife measured ~30 degrees inclusive and was reprofiled to ~22,5 degrees inclusive on the Tormek SB-250 Blackstone fitted with the homemade jig you can see in the last picture, then deburred on the Tormek leather wheel coated with 1.0 micron diamond paste.
This provides for just a tiny bit of micro-convexity of the apex which strengthens it, and the resulting edge is now stable & reverse chesthair-whittling sharp.
This was actually the third time i had to redo the sharpening, as the first two times the edge collapsed from a few firm slices into a polyethylene cutting board.
My guess is that the factory edge may have been overheated during sharpening.

AfbeeldingAfbeelding

AfbeeldingAfbeelding

Afbeelding
Kennis weegt niets.
Avatar gebruiker
Kwakster
Forumbaasje
 
Berichten: 4086
Geregistreerd: 01 jan 1970, 00:00
Woonplaats: Apeldoorn

Re: Vintage Artus Flex knives

Berichtdoor Kwakster op 16 okt 2019, 08:17

Currently busy sharpening two other Flex knives on the Tormek; a second yellow one and a pink one.
From top to bottom: the second yellow knife (with taped blade) which has just been sharpened on the Tormek to ~22,5 degrees inclusive and with the burr still attached to the edge, the pink knife (with taped blade) still with it's ~30 degrees inclusive blunt factory edge, and the first yellow knife.

AfbeeldingAfbeelding

AfbeeldingAfbeelding

AfbeeldingAfbeelding
Kennis weegt niets.
Avatar gebruiker
Kwakster
Forumbaasje
 
Berichten: 4086
Geregistreerd: 01 jan 1970, 00:00
Woonplaats: Apeldoorn

Re: Vintage Artus Flex knives

Berichtdoor Kwakster op 16 okt 2019, 08:18

Each blade is just under a millimeter thick, and also quite flexible for such a relatively hard & wear resistant steel.
Not my picture, but it gives an idea of both the blade thickness and the flexibility of these knives:

Afbeelding
Kennis weegt niets.
Avatar gebruiker
Kwakster
Forumbaasje
 
Berichten: 4086
Geregistreerd: 01 jan 1970, 00:00
Woonplaats: Apeldoorn

Re: Vintage Artus Flex knives

Berichtdoor Kwakster op 19 okt 2019, 13:21

This is how the second yellow Flex knife came out:

AfbeeldingAfbeelding

AfbeeldingAfbeelding

AfbeeldingAfbeelding

Afbeelding

Blade thickness: 1,0 mm
Thickness behind the edge: 0,30 mm
Edge angle: ~22,5 degrees inclusive
Microbevel: ~30 degrees inclusive

And the pink version:

AfbeeldingAfbeelding

AfbeeldingAfbeelding

AfbeeldingAfbeelding

Afbeelding

Blade thickness: 0,98 mm
Thickness behind the edge: 0,27 mm
Edge angle: ~22,5 degrees inclusive
Microbevel: ~30 degrees inclusive
Kennis weegt niets.
Avatar gebruiker
Kwakster
Forumbaasje
 
Berichten: 4086
Geregistreerd: 01 jan 1970, 00:00
Woonplaats: Apeldoorn

Re: Vintage Artus Flex knives

Berichtdoor Kwakster op 22 okt 2019, 08:13

This afternoon i carried the first yellow Flex knife on my belt, with the T-shirt tucked in and the fleece jacket covering the sheated knife, which concealed it completely.
Even under just a loose hanging dark blue T-shirt there's not much printing.

Impression so far is that the sheated knife wears very comfortably and i don't even notice it when tying my shoelaces, walking around, driving a car, or having a snack at a table.
You could basically carry this knife all day and forget that it's there at all, and yet it's still very accessible.
What also seems to work well (so far anyway) is the PVA glue mod i did inside the sheath, as the self-blunting effect on the edge is gone and it stays sharp.

AfbeeldingAfbeelding

AfbeeldingAfbeelding

AfbeeldingAfbeelding

AfbeeldingAfbeelding
Kennis weegt niets.
Avatar gebruiker
Kwakster
Forumbaasje
 
Berichten: 4086
Geregistreerd: 01 jan 1970, 00:00
Woonplaats: Apeldoorn

Re: Vintage Artus Flex knives

Berichtdoor Kwakster op 22 okt 2019, 08:13

And because of the thin stainless blade & very grippy handle the Flex knife also does quite well as a tactical petty knife, :D
Tonights dinner was a sauerkraut oven dish with bacon, sausage, onions, and garlic.

AfbeeldingAfbeelding

AfbeeldingAfbeelding

AfbeeldingAfbeelding
Kennis weegt niets.
Avatar gebruiker
Kwakster
Forumbaasje
 
Berichten: 4086
Geregistreerd: 01 jan 1970, 00:00
Woonplaats: Apeldoorn

Re: Vintage Artus Flex knives

Berichtdoor Kwakster op 22 okt 2019, 08:14

Article about the Artus Flex knife in American Tactical Knives magazine.
The picture can be clicked 2 x then enlarged further to read the text.

Afbeelding

Two pictures with German text:

AfbeeldingAfbeelding
Kennis weegt niets.
Avatar gebruiker
Kwakster
Forumbaasje
 
Berichten: 4086
Geregistreerd: 01 jan 1970, 00:00
Woonplaats: Apeldoorn

Vintage Artus Flex knives

Berichtdoor Arjan Stam op 06 nov 2019, 10:19

Thats a very interesting knife. Is there no damage to the cutting edge from al that bending? I would expect some fatige in the steel or is this not an issue?


Verzonden vanaf mijn iPhone met Tapatalk
Arjan Stam
Forumlid
 
Berichten: 77
Geregistreerd: 08 aug 2015, 15:40

Re: Vintage Artus Flex knives

Berichtdoor Kwakster op 07 nov 2019, 11:04

No noticeable damage, also because the knife is never bent beyond it's elastic range.
Kennis weegt niets.
Avatar gebruiker
Kwakster
Forumbaasje
 
Berichten: 4086
Geregistreerd: 01 jan 1970, 00:00
Woonplaats: Apeldoorn

Re: Vintage Artus Flex knives

Berichtdoor Kwakster op 07 nov 2019, 11:16

All the knives now have the "anti-selfblunting mod" done, and have their edges carefully resharpened on the Tormek.
I will probably keep 2 of these for my own collection, one is already on it's way to a US forum member, and the remaining 5 will also go up for sale.

Afbeelding
Kennis weegt niets.
Avatar gebruiker
Kwakster
Forumbaasje
 
Berichten: 4086
Geregistreerd: 01 jan 1970, 00:00
Woonplaats: Apeldoorn

Re: Vintage Artus Flex knives

Berichtdoor Kwakster op 08 nov 2019, 21:36

Personally i knew about the Flex knives only through an old German knife magazine, and i never even saw or handled one in real life before i bought these.
So far and from actual hands-on experience i learned that the sheathed knife carries very comfortably as well as inconspicuously on a belt, and accessibility of the knife is also great (although not super fast)
After a while i actually tend to forget that something is strapped to my belt, an aspect that could make it more likely that you have it on you when you need it.

While the thin blade indeed has a certain amount of flexibility it has no distal taper and is also relatively wide, both of which lessen that flexibility quite a bit.
The knife is definitely stiff enough to stab with, aided by the very secure steel guard & the grippy rubber handle.
Regarding actual use i really like it for allround kitchen jobs, and it's definitely coming with me on our next camping trip.
It also excels in cutting cardboard, and i use it quite a lot for that.
Kennis weegt niets.
Avatar gebruiker
Kwakster
Forumbaasje
 
Berichten: 4086
Geregistreerd: 01 jan 1970, 00:00
Woonplaats: Apeldoorn


Keer terug naar International Knives & Tools

Wie is er online

Gebruikers op dit forum: Geen geregistreerde gebruikers. en 1 gast

cron